TV Input Lag in Games and How to Find the Cause
You plug the console into the new television, start a fighting game or a platformer you know by heart, and something feels wrong. Jumps land a fraction late. Parries you used to hit every time slip past.

You plug the console into the new television, start a fighting game or a platformer you know by heart, and something feels wrong. Jumps land a fraction late. Parries you used to hit every time slip past. The picture looks gorgeous, sharper than the old set, and yet the game feels like it is wading through syrup. Nothing on the box mentioned this, and the console settings look the same as before.
That sluggish feeling is almost always input lag: the delay between pressing a button and seeing the result on screen. The television is usually the biggest contributor, but not always, and the fix depends on finding which link in the chain is adding the delay. Over the years I have helped a fair number of readers and colleagues track this down, and the culprit is rarely where they first point.
Where the delay actually comes from
Every frame you see passes through a chain: controller to console, console processing the game, console to TV over HDMI, and then the TV's own processing before the panel lights up. Each step adds milliseconds. A wired controller adds 1 to 4 ms. A wireless one can add 8 to 15 ms, depending on the model and interference. The game itself might take 50 to 100 ms from button press to output before the TV is even involved.
The television's share is the part you can most easily change. Modern sets apply motion smoothing, noise reduction, sharpening, local dimming and upscaling, and each of those needs to hold frames in memory to analyse them. A TV in its default picture mode commonly adds 60 to 120 ms. The same TV in its game mode often adds 10 to 20 ms. At 60 frames per second, one frame lasts about 16.7 ms, so default mode can cost you five or six frames of delay. Players notice that.
This is also the reason old light gun games stopped working on flat screens, which we covered in our piece on light guns and modern TVs. The processing delay that ruins light gun timing is the same one slowing your jumps.
A step by step way to find the cause
Work through this in order. Most people find the problem by step three.
- Switch the TV to its game mode. The name varies: Game Mode, Game Optimiser, Game Motion Plus. Look under picture settings. On many sets, this alone removes most of the lag.
- Check that the mode actually stuck. Some TVs apply game mode per HDMI input, or reset it when the console sends an HDR signal. Change inputs and come back to check. I have seen this catch out three separate people who swore game mode was on.
- Turn on ALLM if your TV and console support it. Auto Low Latency Mode lets the console tell the TV to switch to game mode by itself. It sits in the TV's HDMI or external device settings. Samsung calls it Auto Game Mode, and LG calls it Instant Game Response.
- Rename the input to PC or Game. On some Samsung and LG models, labelling the HDMI input as a PC or game console disables extra processing even outside game mode.
- Disable remaining picture extras. Motion smoothing, noise reduction and dynamic contrast can sometimes stay active even in game mode. Switch them off one at a time.
- Try a wired controller. If lag drops noticeably with a cable, the wireless link or a crowded 2.4 GHz environment is adding delay.
- Remove anything between console and TV. Soundbars, AV receivers and capture cards in passthrough can add a frame or two. Plug the console straight into the TV to compare.
- Test a different game. If only one game feels slow, the delay may be in that game, especially titles locked to 30 frames per second, which naturally feel heavier.
Change one thing at a time and play the same short section after each change. A training mode in a fighting game is ideal, because the timing is fixed and repeatable.
The common advice that misleads people
Forum threads often say to check the response time on the TV's spec sheet. Response time sounds like it should measure lag, and manufacturers print small numbers like 1 ms or 5 ms that look reassuring.
It measures something else entirely. Response time is how quickly a pixel changes from one colour to another, which affects motion blur and ghosting. Input lag is how long the TV takes to start showing a frame after it receives the signal. A TV can have a fast pixel response and still add 90 ms of processing delay in its default mode. Buying by response time is one of the most common reasons people end up with a TV that feels slow.
The figure to look for is input lag in game mode, measured in milliseconds, ideally from independent testers who use a dedicated lag measurement device. If a review does not list it, assume nothing.
The second piece of advice I would ignore is that 120 Hz fixes lag. Higher refresh rates do reduce the time between frames, and they can shave off a few milliseconds. They do nothing for processing delay. A 120 Hz TV outside game mode is still slow.
Testing lag without special equipment
Professional testers use a light sensor and a signal generator. You can get a rough comparison with a phone.
Put the console's controller in view of the TV, set your phone to record slow motion at 240 frames per second, and film yourself pressing a button that triggers an instant on-screen reaction, such as a menu cursor move. Count the slow motion frames between the button going down and the screen changing. Each frame at 240 fps is about 4.2 ms. Do this ten times in each picture mode and average it.
The numbers include the whole chain, not only the TV, so they are not directly comparable with published reviews. But they show the difference between modes clearly. In my own living room, the default mode measured an average of 23 frames, about 96 ms, and game mode measured 13 frames, about 54 ms, end to end with the same game. That gap matched what my hands had been complaining about for weeks.
Frame rate interacts with all of this, since a lower frame rate means each frame lasts longer on screen. Our look at what frame rate does to how a game feels explains why a 30 fps game can feel laggy even on a fast TV.
When it is not the TV
If you have done everything above and the lag remains, look elsewhere. Wireless headsets add audio delay that can make you feel visual lag that is not there. Bluetooth audio is a frequent cause, and the habits in our Bluetooth audio lag guide will help. Cloud gaming adds network delay that no TV setting can remove.
FAQ
What is a good input lag for gaming on a TV?
Under 20 ms in game mode is excellent, under 40 ms is fine for most players. Above 60 ms, timing-heavy games start to feel noticeably sluggish.
Does game mode make the picture worse?
Slightly, on some sets. You may lose motion smoothing and some sharpening, but most modern TVs keep colour and HDR intact.
Why does my TV feel laggy only with HDR games?
Some TVs leave game mode when an HDR signal arrives. Check the picture mode while the HDR game is running and set game mode again.
Can an HDMI cable cause input lag?
Not in a measurable way. A faulty cable causes dropouts or flicker, not steady delay.
More in Tech Notes
Tech Notes
Why Upscaling Makes Modern Games Look Softer on PC
A reader sent me a photograph of his monitor last month with a note that said something is wrong with my eyes or my graphics...
Tech Notes
How Online Games Rewind Time to Decide Who Shot First
You stepped out from behind the wall, saw the enemy, fired, watched the blood effect, and then your screen went grey and the...
Tech Notes
HDMI Handshake Failures and How to Find the Cause
The console was on. The television said no signal. Ten seconds later the picture arrived, held for four seconds, went black...